- Grundfos South Africa
- Learn
- Ecademy
- All courses
- 4 - Wastewater in commercia...
- Test your knowledge
Question 1 of 6
Intermediate
What are the approaches that can reduce hydrostatic pressure on your building?
Question 2 of 6
Intermediate
When is it ideal to use a lifting station as a pressurised system for wastewater removal in commercial buildings?
Question 3 of 6
Intermediate
How can you tell if you need to establish a drainage system as part of your building project?
Question 4 of 6
Intermediate
What does a Grundfos MULTILIFT protect against?
Question 5 of 6
Intermediate
Would you recommend drainage around a building if there was soil of permeability and the groundwater level was above drainage level?
Question 6 of 6
Intermediate
What makes the Grundfos MULTILIFT easy to install?
Question 6 of 6
Intermediate
Happy with your answers?
Submit your current answers and get the final test result.
Test results
Congratulations. You have passed the test and completed the 4 - Wastewater in commercial buildings
Sorry. You did not pass the 4 - Wastewater in commercial buildings test this time
Achieved badges:
How would you rate this course?
1: What are the approaches that can reduce hydrostatic pressure on your building?
Constructing a robust foundation, anchoring the building to the underground, or installing a drainage system – or all three in some cases
1: What are the approaches that can reduce hydrostatic pressure on your building?
There is no need to reduce the hydrostatic pressure as it adapts automatically to the weight of the building.
You can find the answer here >
1: What are the approaches that can reduce hydrostatic pressure on your building?
Using the help of the local water supply company to once a year pump away the rising ground water around the building.
You can find the answer here >
2: When is it ideal to use a lifting station as a pressurised system for wastewater removal in commercial buildings?
When sanitary appliances are installed in the basement of an existing building, when space outside the building is limited or when excavation conditions are difficult.
2: When is it ideal to use a lifting station as a pressurised system for wastewater removal in commercial buildings?
When there is a need to remove black and grey wastewater, drainage water and surface water.
You can find the answer here >
2: When is it ideal to use a lifting station as a pressurised system for wastewater removal in commercial buildings?
When storage of wastewater volumes is required over a longer period of time.
You can find the answer here >
3: How can you tell if you need to establish a drainage system as part of your building project?
If the building next door does not have a drainage system, your building does not need one either.
You can find the answer here >
3: How can you tell if you need to establish a drainage system as part of your building project?
When the projected area of a building exceeds 2.000 m2 a drainage system is required.
You can find the answer here >
3: How can you tell if you need to establish a drainage system as part of your building project?
By conducting a thorough pre-investigation of the conditions of the soil, the groundwater conditions, and the drainage situation on neighbouring lots.
4: What does a Grundfos MULTILIFT protect against?
Flooding of cooling towers
You can find the answer here >
4: What does a Grundfos MULTILIFT protect against?
Too high concentration of faecal matters in the wastewater
You can find the answer here >
4: What does a Grundfos MULTILIFT protect against?
Backflow and basement flooding
5: Would you recommend drainage around a building if there was soil of permeability and the groundwater level was above drainage level?
5: Would you recommend drainage around a building if there was soil of permeability and the groundwater level was above drainage level?
Yes
5: Would you recommend drainage around a building if there was soil of permeability and the groundwater level was above drainage level?
Could be necessary if the groundwater level is expected to rise
You can find the answer here >
6: What makes the Grundfos MULTILIFT easy to install?
You only need to set the following in the controller: 1) the maximum number of starts/stops of the pumps and 2) the level of the high water level alarm in the controller.
You can find the answer here >
6: What makes the Grundfos MULTILIFT easy to install?
The system comes pre-assembled with a freely adjustable inlet and many other installer benefits
6: What makes the Grundfos MULTILIFT easy to install?
The system comes pre-assembled and all settings in the controller are set from the factory.
You can find the answer here >